What is a FedRAMP 3PAO?

A Third Party Assessment Organization is the independent assessor at the center of FedRAMP: it tests a cloud service against the government's security baselines and reports the results. It never grants authorization, and it never advises on what it assesses.

Marketplace figures verified live on fedramp.gov, November 16, 2026. Last updated: 2026-11-17.

The definition

A 3PAO (Third Party Assessment Organization) is an independent organization accredited through the American Association for Laboratory Accreditation (A2LA) and recognized by FedRAMP to assess cloud service offerings (CSOs) against the applicable FedRAMP baseline or certification class.

What a 3PAO does:

What a 3PAO does not do: grant authorization. That decision belongs to an agency Authorizing Official, who issues the Authority to Operate (ATO), or — under FedRAMP 20x — to the FedRAMP Program Management Office, which issues program certification directly. The 3PAO's job is to test and report; someone else decides.

The independence rules

Independence is the defining constraint on a 3PAO. A 3PAO must be independent of any cloud service provider (CSP) it assesses, and it cannot, for a system it will assess:

This is why the FedRAMP ecosystem splits into two kinds of firm: assessors (the 3PAOs) and advisors (the firms that do gap assessments, landing-zone design, SSP authorship, evidence preparation, and remediation). A CSP typically hires both — just never the same firm for both roles on the same system. Some firms, such as TalaTek and Coalfire, run both an assessment practice and an advisory practice, kept separate by the independence rules. See the advisors and resources page for the advisory side.

The rules are set out in FedRAMP's 3PAO Obligations and Performance Standards (v3.3, April 6, 2023).

How a firm becomes a 3PAO

FedRAMP recognizes assessors through accreditation by A2LA. The model:

A 2024 FedRAMP strategy session (RFC-0002) proposed revisions to 3PAO training, role, and certification requirements — part of the same modernization wave as FedRAMP 20x.

Terminology warning. Under the Consolidated Rules for 2026 (CR26), FedRAMP refers to assessors in official usage as FedRAMP-recognized independent assessment services / assessors — the "3PAO" label is being retired. Likewise, the FedRAMP Marketplace now carries a banner stating that "FedRAMP Authorization" is now called "FedRAMP Certification" and impact levels have been replaced with Classes A–D; legacy impact levels are shown in parentheses only until December 31, 2026, and "beginning in January 2027, 'Low,' 'Moderate,' and 'High' Impact Levels will be removed." This site keeps using "3PAO" because it remains the dominant search term and still appears in legacy documentation, and gives the new terms alongside it.

What assessors test against

The foundation is NIST SP 800-53 Rev 5 (September 2020) — more than 1,000 controls across 20 families, including the newer SR (supply chain) and PT (PII processing) families. FedRAMP's baselines are tailored from it, with FedRAMP-specific parameters. FIPS 199 categorization sets the impact level.

Rev5 baseline control counts — commonly cited approximations. Counts vary slightly by counting method (base controls vs. enhancements, and whether FedRAMP-specific additions are included).
Baseline Controls (approx.) Notes
Low~125Becomes Class B under CR26
Moderate~325The most common baseline — roughly 80% of authorizations; becomes Class C
High~421Becomes Class D (not yet operational under 20x)
LI-SaaS (Tailored Low Impact SaaS)~37Up to ~50–60 if PII or mobile applies

Under CR26 and FedRAMP 20x, the model shifts: impact levels become certification Classes A–D, and narrative control documentation is replaced by Key Security Indicators (KSIs) — measurable, automatable security outcomes validated against machine-readable evidence. Class A is an entry tier leveraging approved alternative frameworks, with assessment optional; independent assessment is mandatory from Class B up. Class D is not yet operational — the 20x Class D pilot is estimated for FY27 Q1–Q2.

A note on KSI counts: published figures vary widely between sources and change as the rules dataset is updated, so this site does not publish a settled KSI number. Check the current FedRAMP rules dataset for the latest count.

How many 3PAOs are there?

49 recognized assessors were listed on the FedRAMP Marketplace as of November 16, 2026 (Marketplace data last updated November 13, 2026). By class experience (Marketplace filters — a firm appears under every class it has assessed, so these counts overlap and sum to more than 49): Class A (Pilot) 3, Class B (Low) 21, Class C (Moderate) 29, Class D (High) 13. By highest class actually held, verified firm by firm on November 17, 2026: Class D 13, Class C 17, Class B 2, no assessments yet 14, class not recorded 1 — no firm has Class A as its highest class.

Beware a stale figure: a July 2026 blog post claimed "28 recognized 3PAOs." That number is contradicted by the live Marketplace and by two independent directories counting 48–49. Treat "28" as wrong.

The full list, with each firm's classes and assessment counts, is on the companion assessor directory.

When a cloud service needs a 3PAO assessment

Any cloud service used by a federal agency generally must be FedRAMP authorized — OMB Memorandum M-24-15 directs agencies to use FedRAMP for risk assessments, security authorizations, and ATOs for cloud services. A CSP needs a 3PAO assessment when pursuing FedRAMP authorization or certification: the 3PAO performs the Readiness Assessment and the full Security Assessment, and annual reassessments thereafter. Under 20x, independent assessment is mandatory from Class B up; Class A does not require it.

The end-to-end journey — sponsor, readiness, documentation, assessment, authorization, continuous monitoring — is on the process page.

Frequently asked questions

What does 3PAO stand for?

Third Party Assessment Organization. Under the Consolidated Rules for 2026, FedRAMP's official term is "recognized independent assessor," but "3PAO" remains the term everyone searches for and the one used in most existing documentation.

Can the same firm assess and advise the same cloud service?

No. Independence rules bar a 3PAO from implementing controls, remediating findings, or writing the SSP for a system it assesses. Firms that do both kinds of work keep the practices separate.

How is a 3PAO different from a C3PAO?

A 3PAO assesses cloud providers for FedRAMP (GSA) against NIST SP 800-53 Rev 5 and is accredited by A2LA. A C3PAO assesses defense contractors for CMMC (DoD) against NIST SP 800-171 Rev 2 and is accredited by The Cyber AB. The two are not interchangeable. See the full 3PAO vs C3PAO comparison.

How long does a 3PAO assessment take?

The assessment phase itself typically runs 2–4 months including remediation and retesting, with the testing window usually 6–12 weeks. The full journey to authorization is much longer — 12–24 months for a typical Moderate authorization. See the cost guide for durations by level.

Next: the assessment process